Marking Of The Cansync-Master Option Module Type Code - Baumuller BM4-O-CAN-06 Operating Instructions Manual

Figure 3:
4.3

Marking of the CANsync-Master option module type code

On the front panel, you will find the type code ("D" in
label ("E" in
NOTE
This type code applies only to the CANsync-Master option modules of series b maXX 4400.
Other plug-in modules have their own type codes.
BM4 -
BM4 -
BM4 - O -
BM4 - O - CAN -
This type code is located on the front of the front panel and on the label. The type code
contains the plug-in module's basic data. On the basis of the type code, you will be able
to find more data in the chapter entitled "Technical Data". For a list of all the technical da-
ta, refer to
Operating Instructions CANsync-Master Option Module for BM4-O-PLC
Description of the CANsync-Master option module
Danger zones
ZFigure1 on page 17), there is the plug-in module's serial number.
O - CAN - XX
O - CAN - XX
CAN - XX
XX
ZAppendix D - Technical Data–
ZFigure1
Device generation in which you can install the plug-in
module
Option module
Plug-in module type (b maXX CAN)
Version
05: CANsync-Slave
06: CANsync-Master for b maXX PLC
from page 53 onward.
BM4-O-CAN-06
4
on page 17) and on the
19
von 56