Definition Of The Term Declaration Of Conformity; Definition Of The Term Declaration By Manufacturer - Baumuller BM4-O-CAN-06 Operating Instructions Manual

C.3

Definition of the term Declaration of Conformity

Provide this Baumüller equipment is subjected to normal use in your machinery you can
assume that the equipment satisfies the requirements of 73/23/EEC.
Compliance with 89/336/EEC (EMC Directive) depends on how the equipment is instal-
led. Since you are performing installation yourself, it is you who are responsible for com-
plying with 89/336/EEC.
We will provide you with support in the form of EMC information. You will find this infor-
mation in the operating instructions of the b maXX 4400 basic unit. When you have com-
plied with all the requirements we impose in this documentation, you can assume that the
drive satisfies the requirements of the EMC Directive.
To enable you to market your machine within the EU, you must be in possession of the
following:
m Conformity mark (CE mark)
m Declaration(s) of Conformity regarding the directive(s) relevant to the machine
C.3 Definition of the term Declaration of Conformity
A Declaration of Conformity as defined by this documentation is a declaration that the
electrical equipment brought into circulation conforms to all the relevant fundamental
safety and health requirements.
By issuing the Declaration of Conformity in this section the Baumüller Nürnberg Electronic
GmbH & Co. KG declares that the equipment conforms to the relevant fundamental safety
and health requirements resulting from the directives and standards which are listed in
the Declaration of Conformity.
C.4

Definition of the term Declaration by Manufacturer

A Declaration by Manufacturer as defined by this documentation is a declaration that the
machine/safety component brought into circulation conforms to all the relevant funda-
mental safety and health requirements.
By issuing the Declaration by Manufacturer in this section the Baumüller Nürnberg Elec-
tronic GmbH & Co. KG declares that the equipment conforms to the relevant fundamental
safety and health requirements resulting from the directives and standards which are list-
ed in the Declaration by Manufacturer.
The Baumüller equipment is integrated into a machine. For health and safety, of the users
for example, it is important for the entire machine to conform to all the relevant fundamen-
tal safety and health requirements. For this reason the Baumüller Nürnberg Electronic
GmbH & Co. KG draws attention in the Declaration by Manufacturer to the fact that it is
prohibited to put the machine as a whole into operation before it has been declared that
the machine conforms to the provisions of the Machinery Directive.
50
Operating Instructions CANsync-Master Option Module for BM4-O-PLC BM4-O-CAN-06
Document No.: 5.02056.01A
von 56
Baumüller Nürnberg Electronic GmbH & Co. KG