Table of Contents
Advertisement
2.2
Information signs
NOTE
This indicates particularly important information.
2.3
Legal information
This documentation is intended for technically qualified personnel that has been specially
trained and is completely familiar with all warnings and maintenance measures.
The equipment is manufactured to the state of the art and is safe in operation. It can be
put into operation and function without problems if you ensure that the information in the
documentation is complied with.
Operators are responsible for carrying out servicing and commissioning in accordance
with the safety regulations, applicable standards and any and all other relevant national
or local regulations with regard to cable rating and protection, grounding, isolators, over-
current protection, etc.
Operators are legally responsible for any damage that occurs during assembly or connec-
tion.
2.4
Appropriate Use
You must always use the plug-in module appropriately. Some important information is list-
ed below. The information below should give you an idea of what is meant by appropriate
use of the plug-in module. The information below has no claim to being complete; always
observe all the information that is given in these operating instructions.
m You must only install the plug-in module in series b maXX 4400 units.
m Configure the application such that the plug-in module is always operating within its
m Ensure that only qualified personnel works with this plug-in module.
m Mount the plug-in module only in the specified slot/slots.
m Install the plug-in module as specified in this documentation.
m Ensure that connections always comply with the stipulated specifications.
m Operate the plug-in module only when it is in technically perfect condition.
m Always operate the plug-in module in an environment that is specified in the technical
m Always operate the plug-in module in a standard condition.
m Observe all the information on this topic if you intend to store the plug-in module.
You will be using the plug-in module in an appropriate way if you observe all the com-
ments and information in these operating instructions.
Operating Instructions CANsync-Master Option Module for BM4-O-PLC
specifications.
data.
For safety reasons, you must not make any changes to the plug-in module.
Basic Safety Instructions
BM4-O-CAN-06
2
11
von 56
Advertisement
Table of Contents
