Baumuller BM4-O-CAN-06 Operating Instructions Manual page 38

8.3
Error messages (error list) responses to errors
Pattern
One flash then a pause
Two flashes then a pause
Three flashes then a pause
Four flashes then a pause
NOTE
For more details, refer to the "b maXX PLC Operating Instructions" and the "CANsync Master
Application Manual".
36
Operating Instructions CANsync-Master Option Module for BM4-O-PLC BM4-O-CAN-06
Document No.: 5.02056.01A
von 56
Meaning
The hardware is defective or there is no
CANsync hardware on the option module
No CANsync software on the CANsync-
Master option module
You need a newer version of the CANsync
software-on the CANsync-Master option
module
Hardware fault on the b maXX 4400 basic
unit
Response
Send the module back
to the manufacturer
Send the module back
to the manufacturer
Send the module back
to the manufacturer
Send the unit back to
the manufacturer
Baumüller Nürnberg Electronic GmbH & Co. KG