Cessna T303 Installation, Service & Parts Manual page 4

Avionic Installations Service/Parts Manual
FOREWORD
This manual provides the radio service technician with an illustrated parts breakdown of avionic installations.
audio control adjustment procedures for potentiometers, autopilot and IFCS rigging procedures, service and
installation information and avionic wiring diagrams pertaining to equipment installed in the Cessna T303.
This manual is separated into the following nine sections:
Section I - Cessna-Crafted Avionic Installations
Section II
- Vendor-Crafted Avionic Installations
Section III - Antenna Installations
Section IV -
Audio Equipment Installations
Section V - Miscellaneous Avionic Equipment Installations
Section VI - Avionic Equipment Loading Charts
Section VII - Autopilot & IFCS Rigging Procedures
Section VIII - Numerical Index of Spare Parts
Section IX - Avionics Wiring Diagrams
The table of contents will enable the readers to find the information necessary to check wiring installations and
parts required for any particular T303 avionic installation.
NOTICE
For recommended service information, bench testing and illustrated
spare parts listing of the various avionic systems called out in this
manual, refer to the appropriate avionic service/parts manual listed
in the Cessna Customer Care Supplies and Publication.
CROSS REFERENCE LISTING OF POPULAR NAME VS. MODEL NUMBER AND SERIALS
NOTE
All aircraft, regardless of manufacturer, are certified under model number designations.
However, popular names are ofter used for marketing purposes.
To provide a consistent
method of referring to the various aircraft, model numbers will be used in this publication
unless names are required to differentiate between versions of the same basic modeL The
following table provides a cross-reference listing of popular name vs. model number.
MODEL
YEAR
POPULAR NAME
CRUSADER
CRUSADER
CRUSADER
1982
1983
1984
MODEL BEGINNING
T303 T30300001
T303
T30300176
T303 T30300258
SERIALS
ENDING
T30300175
T30300257
1