Table of Contents
Advertisement
Avionic Installations Service/Parts Manual
NOTES
SUPPLI
E
D WITH UNIT
DESCRIPTION - The
this column.
part's name is entered in
15 PART NO. - The part's number is entered in
this column.
NOTES
Part numbers shown in the "Equipment Table"
of the various diagrams are for reference
only and do not constitute a material require-
ment unless specifically noted on the individual
parts breakdown page.
Refer to the various
parts breakdown in the preceeding sections of
this manual for varification of part numbers.
Part numbers shown in the "Equipment Table"
on the various diagram pages that are for
reference only will not be changed unless it
affects wire terminals and fabrication.
16 ITEM NO. - These numbers are assigned in a
numerical sequence to the "Equipment Table"
parts and then placed in a hexagon on the field
of the drawing to reflect the location of the
parts in the diagram.
NOTES: - Notes may be added to the diagram
as deemed necessary by the draftsman inorder
4
WI
R
E
T
A
BLE
WIRING DIAGRAM
RADAR
ALTIMETER.
(AA-100)
1379
3920276
to clarify a callout or to provide installation
instructions, etc.
18MODEL APPLICATION CHART - The model
and serial effectivity is filled in to reflect
model and serial applicability.
9REVISION BLOCK - Used to record all Drawing
Change Notices incorporated into the diagram
and all other drawing changes that may be made
to the diagram.
LET - Records the drawing revision letter.
DESCRIPTION - Used to record the drawing
changes in a manner which can be
easily correlated with the field and
bill of material of the drawing.
DATE - The date entered is the date the
revision was incorporated on the
drawing.
APPD - Internal signatures required for
approval are entered here.
9-3.
TABLE OF CONTENTS.
The following Table
of Contents is provided to expedite the technician to
the desired wiring diagram. Wiring Diagrams are
arranged in a numerical sequence by drawing num-
ber in lieu of page numbers.
9-2
Hide quick links:
Advertisement
Table of Contents
