State Monitor - Mitsubishi Melsec-L Series User Manual

13.2 State Monitor

13 - 7
The following items are monitored.
• Signals of the C24
• Communication error information
• Operation setting switches
• Protocol execution status during the predefined protocol communication
[Basic operation]
1. Display the "Predefined Protocol Support Function" screen.
For the method for displaying it, refer to Section 9.1.
2. Display the "Module Selection" screen in the following procedure.
"Predefined Protocol Support Function" screen
Function] [Module Selection]
3. Select the I/O address and channel of the module to be debugged, and press
the Set button.
4. As the OK button is clicked, the module information is set.
5. Display the "State Monitor" screen in the following procedure.
"Predefined Protocol Support Function" screen
Function] [State Monitor]
13 DEBUG SUPPORT FUNCTION
[Debugging Support
[Debugging Support
13 - 7