Writing To The Flash Rom - Mitsubishi Melsec-L Series User Manual

7.4.2 Writing to the flash ROM

7 - 23
This section explains the procedure to write the contents set in Section 7.4.1. to a flash
ROM.
(1) Displaying the screen for writing to the flash ROM
Display the "Flash ROM Operation" screen by the following procedure.
[Online] [Write to PLC...]
(2) Selecting a module and the parameters to be written
(a) In the "PLC Module" tab, select the "Target" check box of "Intelligent
Function Module (Initial Setting/Auto Refresh)".
(b) In the "PLC Module" tab, select the "Valid" check box of "LC71C24" and the
"Target" check box of "Memory for Read and Write".
7 SETTINGS FOR THE C24
7 - 23