Mitsubishi Melsec-L Series User Manual page 331

(3) Procedure for writing the buffer memory to the flash ROM
• Check if "Flash ROM Write Enable/Protection Status" is set to "Write Enable",
• If "Write Protection" is displayed, select "Flash ROM Write Enable" in the
App. - 2
(a) Displaying the screen for writing to the flash ROM
Open the "Flash ROM Operation" screen by the following procedure.
Parameter setting screen
(b) Executing the write operation to the flash ROM
Select "Request of Flash ROM Write" in the Execution Item area and click
the Execute button.
POINT
before executing the write operation to the flash ROM.
Execution Item area and click the Execute button.
(c) Enabling the set value
Reset the CPU module.
The set values written to the flash ROM is written into the buffer memory of
the module.
(d) Disabling the write operation to the flash ROM
Set "Flash ROM Write Enable/Protection Status" to "Write Protection" in the
"Flash ROM Operation" dialog box or "sequence program", and click the
Execute button.
[Tool] [Flash ROM Operation]
APPENDIXES
App.
App. - 2