Mitsubishi Melsec-L Series User Manual page 49

(2) The ON and OFF states of each signal indicate the following conditions:
(3) Interface connector
(4) Tightening torque
6 - 4
(Output side)
ON 5 V to 15 V DC,
OFF –15 V to –5 V DC,
The following RS-232 interface connector is used for the C24.
• DDK Ltd.
9-pin D-sub (female) screw type (Mating screw M2.6)
17L-10090-27 (D9AC) (-FA)
The following table shows the suitable connector shell for the RS-232 connector.
Type
Connector shell
1: Manufactured by DDK Ltd.
For details on the tightening torque for the RS-232 interface connector, refer to
Section 6.1.1.
6 SETTING AND WIRING
(Input side)
3 V to 15 V DC
–15 V to –3 V DC
Model
17JE-23090-02(D8A)(-CG)
1
6 - 4