Number Of Parameter Settings - Mitsubishi Melsec-L Series User Manual

3.2.1 Number of parameter settings

3 - 3
For the parameter settings of the initial setting and auto refresh setting of the C24, set
parameters (including the parameters for other intelligent function modules) not to
exceed the maximum number of parameters that can be set for a CPU module or the
head module.
For the maximum number of parameters that can be set for a CPU module or the head
module (maximum number of parameter settings), refer to the following manual.
MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and
Inspection)
MELSEC-L CC-Link IE Field Network Head Module User's Manual
(1) Number of parameters for the C24
The following number of parameters can be set for one C24.
Target module
LJ71C24
LJ71C24-R2
(2) Checking method
The number of parameters set for the intelligent function module and the
maximum number of parameter settings can be confirmed by the following
operation.
Project window
Function Module Parameter List].
1)
1) Total number of initial setting parameters marked with a check on the screen
2) Maximum number of parameter settings of initial settings
3) Total number of auto refresh setting parameters marked with a check on the
screen
4) Maximum number of parameter settings of auto refresh settings
Initial setting
0 (Not used)
0 (Not used)
[Intelligent Function Module]
2)
3 SPECIFICATIONS
Auto refresh setting
50 (Maximum number of settings)
51 (Maximum number of settings)
Right click [Intelligent
3) 4)
3 - 3