Communication Rate Setting - Mitsubishi Melsec-L Series User Manual

7.3.2 Communication rate setting

7 - 14
Set the communication rate for the data communication with external devices.
The following is the setting value list.
50
300
600
1200
2400
4800
9600
1 Communication rate of 230,400 bps is available for only CH1.
(1) Precautions
• The transmission speed of the interface, whose communication protocol setting
is set to "MELSOFT Connection", is automatically set to "Auto Setting". In this
case, the data is transmitted at the speed set on GX Works2.
Set "Auto Setting" for the other interface to which no external device is
connected.
• When connecting external devices to both of two interfaces
Perform the setting so that the total of the communication speed of two
interfaces do not exceed 230,400 bps.
• When connecting an external device to either of two interfaces
The maximum of 230,400 bps is available when the external device is
connected to CH1.
The maximum of 115,200 bps is available when the external device is
connected to CH2.
Communication rate
(unit: bps)
14400
19200
28800
38400
57600
115200
230400
7 SETTINGS FOR THE C24
1
7 - 14