Mitsubishi Melsec-L Series User Manual page 112

9 DATA COMMUNICATION USING THE PREDEFINED PROTOCOL
POINT
The following are the maximum numbers of protocols and packets that can be
registered.
• Protocols: Up to 128
• Packets: Up to 256
However, some packets to be registered may cause capacity shortage. In this
case, the maximum numbers of packets above may not be registered.
The usage rate of the packet data area can be confirmed on the "Protocol Setting"
screen in GX Works2.
For details, refer to the GX Works2 Version1 Operating Manual (Intelligent
Function Module).
9
9 - 2 9 - 2