9.5 Programming Example
9.5.1 System configuration/wiring example
9 - 31
This section explains the programming examples and setting examples of the
predefined protocol function.
GX Works2 is used for the settings. Serial communication module LJ71C24 and
Mitsubishi inverter (FREQROL-A700, described as inverter or FR-A700 hereafter) as a
connection target device are used in this setting example.
The system configuration and wiring example are as follows.
(1) System configuration example
In the example, the LJ71C24 is assigned to the I/O numbers X/Y00 to X/Y1F and
connected to external device in 1:1 via RS-422/485.
For details of the system configuration, refer to Chapter 5.
9 DATA COMMUNICATION USING THE PREDEFINED PROTOCOL
9 - 31