Checking The Status Of The A/D Converter Module By The System Monitor - Mitsubishi MELSEC-L Series User Manual

11.7
Checking the Status of the A/D Converter Module by the
System Monitor
To check the LED status or the setting status of the intelligent function module switch setting, select the H/W
information of the A/D converter module on the system monitor of GX Works2.
(1) Hardware LED information
LED status is displayed.
No.
1)
2)
3)
(2) Hardware switch information
The setting status of the intelligent function module switch setting is displayed.
For details on the setting status, refer to the following.
• Intelligent function module switch setting (
1)
2)
94
LED name
0000
RUN LED
0001
ERR. LED
Alternating indication between 0000
(GX Works2 displays the communication status with the A/D converter module, so
ALM LED
that the displaying intervals of 0000
Item
RANGE
⎯
⎯
MODE
⎯
: Indicates the LED off.
H
: Indicates the LED on.
H
Page 133, Appendix 8.1(2))
Intelligent function module switch
3)
Status
and 0001 : Indicates the LED flashing.
H H
and 0001 are not always even.)
H H
Switch1
Switch2
Switch3
Switch4
Switch5