Update Sonde Firmware - Xylem EXO Series User Manual

Sonde
6.4
Update Firmware
Users can check and update sensor or sonde firmware through the KOR interface software. Each device must
be connected to the computer that is running the Desktop version of KOR, and the computer must have
internet access.
1 Open firmware submenu in Kor.
Navigate to the Options menu in KOR, then to the
Firmware submenu. Immediately after clicking the
Firmware submenu button, KOR begins to search for
connected sondes and sensors and loads the table with
names, serial numbers, and current firmware versions.
2 Select device and update.
To update a device, click on the device's name in the table
and then click the Update button.
KOR then updates the device's firmware, which could take
several minutes.
Note: For best power management, update firmware while
a device is connected via USB, as this will provide power to
the device. However, if you use Bluetooth, we recommend
installing fully charged batteries in the sonde.
|
89
pg