Xylem EXO Series User Manual page 44

Power On/Off Handheld
3.2
Users can power on/off and awaken/put to sleep the EXO Handheld (HH) depending on use. In order to
use the HH, users must first power it on. When finished with the HH, users should power it off to increase
its battery life. When temporarily not using the HH, users should put it to sleep, and awaken it when next
needed. The HH's sleep mode is a low-power mode designed to increase its battery life. When finished with
the HH for a long period of time, users should power it off and remove the batteries.
|
44
pg
1 Power on/awaken handheld.
With batteries installed, press and hold the power button
for one second. The Bluetooth wireless indicator will then
illuminate. Next the splash screen will appear then briefly
go black (approximately 5 seconds) while the system starts
up. The HH will then automatically start Kor.
If the HH is asleep, users should briefly press the power
button to awaken it.
2 Power off/put to sleep.
To power off the HH, users must press and hold the power
button for more than three seconds. Once the button has
been held long enough, the screen will power down and go
black.
To put the HH to sleep, press and hold the power button
for less than three seconds, and release it. The screen will
then go black.