Xylem EXO Series User Manual page 46

Attach Handheld to Sonde
3.4
Bluetooth Wireless
Users can wirelessly connect their EXO sondes (above water) to the EXO Handheld using Bluetooth wireless
communication. With Bluetooth, users can reduce the amount of cables needed to operate their sonde. The
wireless connection has a typical range of 10 meters, but this range will fluctuate depending on the operating
environment. Users cannot wirelessly connect through water.
In order to connect via wireless, both devices must be powered on.
|
46
pg
1 Activate sonde's Bluetooth.
Users activate Bluetooth by holding a magnet at the
magnetic activation area. In addition to magnetic
activation, users can also activate Bluetooth by cycling
power to the sonde (remove/reinstall batteries).
2 Discover sonde in KOR.
Every time the Handheld powers on, it automatically
searches for a sonde via the hard-wired cable connection.
3 Rescan sonde.
If a wired connection is not found, and to manually
establish a connection to a sonde via Bluetooth, navigate to
the Connections menu in KOR software on the Handheld.
Select Rescan. KOR will rescan and detect Bluetooth-
enabled sondes. Select the sonde from the list and then
click the Connect button.