Xylem EXO Series User Manual page 92

Handheld
6.7
Update Firmware & KOR Software
To update the instrument firmware and KOR software on the EXO Handheld, use the Desktop version of
KOR on a computer with internet access. KOR Desktop will go online and pull updated files for the Handheld,
which are then transferred to the Handheld.
|
92
pg
1 Connect handheld to computer.
Plug the small end of the USB cable into the port on the
top side of the EXO Handheld. Plug the other end of the
USB cable into a port on your computer. Allow a minute for
Windows to recognize the Handheld as a removable drive
before the Handheld shows up in KOR software.
2 Sync handheld.
When the Handheld is connected to the PC, go to the
Options | Firmware menu in KOR Desktop software. Select
the Update Handheld button from the bottom-right corner
of the menu. Follow the prompts for completing the update
process and rebooting the Handheld.