Chemicals; Conductivity Solutions - Xylem EXO Series User Manual

Health & Safety
6.1
7.1

Chemicals

NOTE: For additional health, safety, and disposal information about reagents, download the MSDS documents
for the chemical in question from the EXO manufacturers' websites: www.ysi.com or www.wtw.de.
First Aid for all solutions
Move to fresh air. If
breathing is difficult,
give oxygen. If
Inhalation
symptoms persist,
seek medical
attention.
Remove
contaminated
clothing and wash.
Wash exposed
Skin Contact area with soap and
water for at least 15
minutes. If irritation
persists, seek
medical attention.
Rinse eyes
immediately with
large amounts of
water, also under
eyelids, for at
Eye Contact
least 15 minutes.
If irritation persists,
seek medical
attention.
Wash out mouth
with water and
then drink plenty of
Ingestion
water. If symptoms
persist, seek medical
attention.
Bromphenol Blue Sodium Salt, Bromphenol Green Sodium Salt
Inhalation:
Avoid breathing vapors or mists. Inhalation of dust may cause irritation of respiratory tissues. Ensure
adequate ventilation is available before handling.

Conductivity Solutions

3161, 3163, 3165, 3167, 3168, and 3169
Ingredients: Water, Potassium Chloride
Inhalation:
Avoid breathing vapors or mists. Inhalation of dust may
cause irritation of respiratory tissues. Ensure adequate
ventilation is available before handling.
Skin:
Exposure may cause irritation with repeated exposure.
Wear lightweight protective clothing, gloves, boots, and
apron.
Eyes:
Can cause irritation and potential eye damage with repeated
exposure. Wear safety glasses with side-shields or face
shield.
Ingestion:
May cause irritation of mouth, throat, and an upset
stomach. Wear a mouth cover or face shield when there is
splashing. Keep away from food and drink. Do not swallow.
First Aid: See box at left.
pH 4.00, 7.00, 10.00 Buffer Solutions
3821, 3822, and 3823
pH 4 Ingredients: Water, Potassium Hydrogen Phthalate,
Red food coloring
pH 7 Ingredients: Water, Potassium Phosphate Monobasic,
Sodium Hydroxide, Yellow food coloring
pH 10 Ingredients: Water, Potassium Hydroxide, Disodium
EDTA dihydrate, Potassium Borate, Potassium Carbonate,
|
111
pg