List Of Events - COBHAM EXPLORER 3075GX User & Installation Manual

List of events

B.2 List of events
Error code
Severity
(ID)
08065-0 ADM WARNING GNSS data
08067-0 ADM ERROR
0806A-0 ADM WARNING VMU connection
0806C-0 ADM ERROR
0806E-0 ADM ERROR
08078-0 ADM WARNING VMU TX frequency invalid The modem unit provided a TX frequency of
0807F-0 ADM WARNING Local administration
08080-0 ADM WARNING Satellite info mismatch
08104-0 ADM ERROR
08107-0 ADM ERROR
0810A-0 ADM ERROR
0810C-0 ADM ERROR
B-2
Description
PCB temperature
VMU frequency setup
VMU 10 MHz reference
enabled
Antenna communication
ADM FPGA load
ADM production data
File system integrity
Table B-1: Event messages
Appendix B: System messages
Explanation
Missing GPS data (fix).
ADM temperature too high. The ACU is not
equipped with a fan, so make sure there is
compliance with the environmental
specifications.
The ACU has lost connection with the sat
modem.
There is a mismatch in the frequency setup.
Wait 5 minutes. If the error persists power-
cycle the terminal.
The Rx or Tx reference signal is not present.
Make sure Rx/Tx cable is connected and that
the VMU is configured to output the RX/TX
reference signal.
zero. Tx will not work.
Local administration mode is currently enabled.
This allows login without providing the admin
password. Will be disabled after 1 hour or next
reboot.
Current chosen manual satellite information
does not match information from the modem.
Please choose another satellite for manual
pointing.
The ACU cannot communicate with the
antenna. Check cable and antenna.
The ADM FPGA cannot be initialised and
loaded.
Production data has been corrupted.
One or more file system partitions are corrupt.
You may have lost your settings and collected
statistics. If restarting the system does not
help, contact your service partner.
98-144390-C