Reset To Factory Default - COBHAM EXPLORER 3075GX User & Installation Manual

Manual-deploy fly-away system for inmarsat gx

Hide thumbs Also See for EXPLORER 3075GX:

Table of Contents

4.1.9

Reset to factory default

Important

When resetting EXPLORER 3075GX to factory default, the following settings are deleted or

reset to factory default:

• Navigation settings

• All added satellite profiles

• All added VSAT modem profiles

• Changes in the network setup

• User permissions

• Display: brightness setting

To reset to factory default settings, do as follows:

1. Select ADMINISTRATION > Factory default.

Figure 4-11: Web interface: ADMINISTRATION > Factory default

2. Click Reset to factory default.

98-144390-C

Warning! Reset to factory default will delete all settings, including

satellite and VSAT modem profiles, network setup, user permissions

and ACU display brightness settings.

Chapter 4: Setup and operation

Setup with the web interface for PC

4-15

Table of Contents

Do you have a question about the EXPLORER 3075GX and is the answer not in the manual?