Proxy Server Settings In Your Browser - COBHAM EXPLORER 3075GX User & Installation Manual

General support
2. Enter the new values as shown on the label:
LNB-LPN: LNB model number
LNB-LSN: LNB serial number, in Inmarsat format
L-MID: Manufacturer ID
LNB-FID: LNB function ID (typically empty, shown with a "-")
3. Click Apply to save the new settings.
4. Restart the system and wait for MDM:NETOK in the display.
5. If you have replaced the RF assembly, you must make a One Touch Commissioning, see
GX Modem: One Touch Commissioning (OTC) on page 5-6.
5.1.7

Proxy server settings in your browser

If you are connecting your computer using a LAN or WLAN interface, the Proxy server
settings in your browser must be disabled before accessing the web interface. Most
browsers support disabling of the Proxy server settings for one specific IP address, so you
can disable Proxy server settings for the web interface only, if you wish. Consult your
browser help for information.
To disable the use of a Proxy server completely, do as follows:
Note
1. In Microsoft Internet Explorer, select Tools > Internet Options > Connections >
LAN Settings.
2. Clear the box labeled Use a proxy server for your LAN.
3. Click OK.
When the proxy server settings are disabled, close and restart your browser. You may need
to change this setting back on return to your Internet connection.
5-8
The following description is for Microsoft Internet
Explorer. If you are using a different browser, the
procedure may be different.
Chapter 5: Service 98-144390-C