Lnb Data Update - COBHAM EXPLORER 3075GX User & Installation Manual

3. At Modem access click the link.
4. Type the user name admin (default) and the password iDirect (default).
5. In the menu Commissioning click One Touch Commissioning.
6. Click Start. Once commissioning is completed the antenna will search for the I5 satellite
with the highest elevation.
7. The antenna will find the satellite and perform necessary steps to enter the network
(software upgrades, if available).
8. The Unified Web Interface of the Core Module will indicate the modem in the network
as well as the modem status in the display in the menu MODEM.
9. When commissioning is completed, test all subscribed services.
5.1.6

LNB data update

If the RF assembly or the LNB has been replaced you must update the LNB data.
WARNING! Make sure to enter the correct values for the new LNB.
Incorrect values may make the system inoperable.
To enter data of the new LNB do as follows:
1. Select SERVICE > LNB.
98-144390-C
Figure 5-7: Web interface: SERVICE > Modem, Factory default
Figure 5-8: Unified web interface of the Core Module
Chapter 5: Service
General support
5-7