Reset To Factory Default - COBHAM EXPLORER 7100GX Installation And User Manual

Setup using the web interface
To save a configuration to a file, do as follows:
1. Select ADMINISTRATION > Export/import config.
Figure 4-10: Web interface: Administration, Export/import configuration
2. Click the button Export. Follow the download instructions on the screen. You can use
this configuration file for upload into another EXPLORER 7100GX,
To load a configuration from a file, do as follows:
1. Select ADMINISTRATION > Export/import config.
2. Click the button Choose File and locate and double click the configuration file (.cfg
file).
3. In the web interface click the button Upload.
To clone a system configuration, do as follows:
1. Reset to factory default, see the following section for details.
2. Import a configuration from file, see section above.
4.1.9

Reset to factory default

When resetting EXPLORER 7100GX to factory default, the following settings are deleted or
reset to factory default:
• Navigation settings
• All added satellite profiles
• All added VSAT modem profiles
• Changes in the network setup
• User permissions
• ACU display: brightness setting
4-12 Chapter 4: Setup and operation 98-147366-A