Manager's Configuration (Optional Settings) - Life Fitness PowerMill Integrity Series Operation Manual

6.2 Manager's Configuration (Optional Settings)

SETTING
Maximum Workout Duration
English / Metric Units
Telemetry
Pause Time Out
Watts Display
METs Display
Calorie Per Hour (CPH) Display
Steps Climbed Display
Max Acceleration Rate
Max Deceleration Rate
Quick Start Via Numeric Keys
System Beeps
Marathon Mode
AUX Source
TV GAIN
On / Off Lvl 0 -
WarmUp Level
On / Off Lvl 21 - 25
PerfMode
30
DEFAULT
60 Minutes
English
(International: Metric)
On
1 Minute
Off (International: On)
Off
On (International: Off)
Off
3
3
Allowed
On
Off
Auto
2
Off
On
DESCRIPTION
This feature allows the setting of maximum workout
duration limits.
This option sets the measurement unit type for weight and
height.
Switching on the telemetry feature makes it possible to use
the Polar-compatible Heart Rate Zone Training exercises
with a Polar telemetry heart rate chest strap for monitoring
the heart rate.
This sets the maximum time during which a workout can
remain in pause mode.
If this option is enabled, the MESSAGE CENTER displays
the Watts equivalent of the step rate.
If this option is enabled, the MESSAGE CENTER displays
the METs equivalent of the step rate.
If this option is enabled, the MESSAGE CENTER displays
the number of calories burned per hour during the work-
out.
If this setting is enabled, the total number of steps climbed
is periodically shown during a workout.
This sets the rate at which the PowerMill Climber acceler-
ates to the selected speed, ranging from one (slowest) to
five (fastest).
This sets the rate at which the PowerMill Climber deceler-
ates to the selected speed, ranging from one (slowest) to
five (fastest).
This setting controls whether the user can start a Quick
Start workout by entering a desired steps per minute rate
via the Numeric Keypad keys.
Enable/Disable system beeps.
This option allows the user to workout indefinitely.
This setting allows control over whether or not an op-
tional CSAFE compatible audio device attached to the
CSAFE connector shall be selectable as an audio source
with the Source Select key.
This setting allows control over the console earphone vol-
ume range for the Life Fitness Attachable TV Source. The
range of settings are from 0 (Low) to 7 (High).
This option, if enabled, controls whether or not Level 0
may be used in program setup or during a workout. Level
0 corresponds to intensity levels below Level 1.
This option controls whether or not Levels 21 though 25
may be used in program setup or during a workout (MAN-
UAL and SPEED INTERVAL workouts ONLY).