Service Menu; Entering And Using The Service Menu - Life Fitness PowerMill Integrity Series Operation Manual

6

SERVICE MENU

A special service menu is available to managers and other authorized personnel to allow access to certain information,
diagnostics tests and configuration settings.

6.1 Entering and Using the Service Menu

To enter the Service Menu press and hold down PAUSE / STOP key on the Console keypad while pressing and releas-
ing the CLEAR key. The PAUSE / STOP key must continue to be held until the system enters the Service Menu State.
The Service Menu consists of the following submenus:
DIAGNOSTIC (TEST / SERVICE)
ƒ
The Diagnostics submenu allows technicians to run system diagnostics. Use the UP / DOWN arrow keys to
navigate through the list. Press the ENTER key to select desired utility. Press the CLEAR key once to exit the
current diagnostic utility or press repeatedly to exit the Diagnostic Menu.
INFORMATION
ƒ
The Information submenu will display information identifying the software version numbers and their associ-
ated part numbers as well as the version numbers of other installed software components. Use this menu when
it is necessary to identify the version / part numbers installed on the product. Use the UP / DOWN arrow keys to
navigate through the list of items. Press the ENTER key to select desired item. Press the CLEAR key once to
exit the current diagnostic utility or press repeatedly to exit the Information Menu.
MAINTENANCE
ƒ
The Maintenance submenu contains a specific set of maintenance utilities for logging maintenance events. Use
the UP / DOWN arrow keys to navigate through the list. Press the ENTER key to select desired event. Press the
CLEAR key to exit the Maintenance Menu.
CONFIGURATION (OPTIONAL SETTINGS)
ƒ
The Manager's Configuration submenu allows the manager to configure options for the product. See the next
page for a list of configuration options (Optional Settings). Use the TIME UP / DOWN arrow keys for
navigation through the options. Use the LEVEL UP / Down arrow keys to change settings. Press the CLEAR key
once to exit the current diagnostic utility or press repeatedly to exit the Configuration Menu.
29