Optional Settings For The Lifecycle 9100R Aerobic Trainer - Life Fitness Lifecycle 9100R Operation Manual

19a04700.opm 6/30/00 10:08 AM Page 25
OPTIONAL SETTINGS FOR THE
LIFECYCLE 9100R AEROBIC TRAINER
l
Maximum Program Duration
The Maximum Program Duration option allows you to change the default maximum
Program Duration of 60 minutes to anywhere from 10 to 99 minutes. Altering the
maximum program time will affect all programs except the Fit Test. To change the
Lifecycle 9100R recumbent aerobic trainer maximum program time, proceed as
follows:
1. Press and hold the 5 key on the numeric keypad.
2. Begin pedaling, then press START.
All LEDs and 7-segment displays will be illuminated. This is called Diagnostic State 1.
There are 10 distinct Diagnostic States. The Maximum Program Duration default
settings are located in Diagnostic State 5. Each time you press the ENTER key you
will advance one diagnostic state. Continue to advance to Diagnostic State 5.
3. When you reach Diagnostic State 5, the current Maximum Program Duration
setting will be displayed. The default maximum program time is 60 minutes.
4. Use the 1 key to decrease the Maximum Program Duration or the 3 key to
increase the Maximum Program Duration.
5. To exit the Diagnostic States, press the CLEAR/PAUSE key repeatedly until you
return to the user display. The user display is the initial display console you see
when you approach the unit for normal operation.
25