Setting The Manual Leap Second Function To No Event - Symmetricom XLi User Manual

S S S S S S S
SUB = ASCII string indicating a leap second will be subtracted.
<MONTH> = Month number that the leap second will be subtracted, on the last day of the
1
month MAR, JUN, SEP, DEC or NONE.
<YEAR> = Year that the leap second will be subtracted, 2001 to 2030 or NONE.
Sample entry: F67 SUB DEC 2007<CR>
Response: OK<CR><LF>

Setting the manual leap second function to no event:

To select no leap second insertion event, enter a continuous string of the form:
F67 <SEP>NONE<CR>
where:
NONE = ASCII string indicating a manual leap second insertion function will be disabled.
The Serial/Network port will respond with the message "ERROR 01 VALUE OUT OF RANGE" if the
input string was in the correct format but contained a value, probably numeric, that was out of the range
of acceptable values.
The Serial/Network port will respond with the message "ERROR 02 SYNTAX" if it receives a string in an
incorrect format, for example the second field should be ADD, SUB or NONE.
The Serial/Network port will respond with the message "ERROR 03 BAD/MISSING FIELD" if the input
string lacks a required field.
88
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S S S S S S S S S S S S S S S S S S S
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S