F100 L/Lock/Unlock - Remote Lockout - Symmetricom XLi User Manual

S S S S S S S
selecting between 10 Base-T and Auto, which provides a 100 Base-T connection where appropriate. If
you have questions about your unit, contact
To display the current Base-T setting, enter:
1
F100<S>BASET<CR>
where
= ASCII character F
F
= unit function number
100
= Space
<S>
BASET = specify Base-T command
= input line terminator
<CR>
The XLi responds:
F100 BASET 10T<CR><LF>
To set the Ethernet port to automatically negotiate the maximum connection speed, enter:
F100<SP>BASET<SP>AUTO<Enter>
To set the Ethernet port's connection speed to 10/100 Base-T, enter:
F100<SP>BASET<SP>10<Enter>
XLi responds:
OK <CR><LF>
RESETING THE UNIT<CR><LF>
PLEASE WAIT...<CR><LF>
F100 L/LOCK/UNLOCK – Remote Lockout
Use function F100 LOCK or UNLOCK to enable/disable TELNET access to the command line interface
through the network port. Use function F100 L to display the status of Remote Lockout. Remote Lockout
can also be set using F100 on the keypad/display interface. The factory setting is "Unlocked". To unlock
remote lockout, use the keypad/display, the serial port command line interface.
Warning:
F100 L and F100 LOCK terminates any active TELNET sessions and prevents future
TELNET sessions. To unlock F100 L or F100 LOCK, use the serial port command line
interface or the keypad display.
To lock the unit from a remote location, enter:
F100 LOCK<CR>
124
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S S S S S S S S S S
H: Sales and Customer Assistance (page
S S S S S S S S S
295).
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S