Configuration - Symmetricom XLi User Manual

S S S S S S S
64 Kb/s Composite Clock Output (Aux Out 1)
Format
1
Interface
2048 kHz Sine Outputs (Aux Out 2,3,4)
Frequency
Amplitude
Connector
Synchronization
Synchronization
Accuracy
CPU-Aware
CE Compliant

Configuration

Prior to installing the E1 card, set the user-configured jumper and DIP switch settings as needed. The
factory settings are as follows:
Figure 16:Jumper view of the E1 Output Card (87-6000E1-6) with S1 and JP1-7 circled.
188
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
As per ITU-T G.703 64 kBits/S Centralized Clock Interface. AMI with 5/8 duty
cycle. All 1's with Bipolar Violations at an 8 Kb/s rate.
Balanced peak into 110 Ω, on wire wrap pins
2048 kHz
Balanced 1Vrms into 100 Ω
wire wrap pins
Phase locked to the clock's internal 10 MHz
"System Time & Frequency Accuracy" on page 6
Refer to
No
No
JP4-JP7
S1
S S S S S S S S S S S S S S S S S S
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S