Enhanced Low Phase Noise Module (87-8040) - Symmetricom XLi User Manual

S S S S S S S S S

Enhanced Low Phase Noise Module (87-8040)

This option provides four Low Noise 10MHz frequency output signals with the capacity to install two
cards into one XLi chassis. The option is only available with the optional OCXO, High Stab OCXO,
Rubidium, and High Stability Rubidium oscillators.
Signal Type:
Synchronization:
Amplitude:
Qty:
Connector:
Physical:
CPU-Aware:
Harmonic distortion:
Spurious:
Isolation:
Phase Noise:
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
Analog sine wave
Frequency locked to the XLi's internal 10 MHz oscillator
+13 dBm ±1.5 dBm, into
four
BNC female
Double high option bay
No
-50 dBc 2nd Harmonic
-80 dBc
-60 dBc
-98 dBc/Hz @ 1 Hz offset
-127 dBc/Hz @ 10 Hz offset
-145 dBc/Hz @ 100 Hz offset
-150 dBc/Hz @ 1 kHz offset
-153 dBc/Hz @ 10 kHz offset
S S S S S S S S S
50 Ω
S S S S S S S S S
2
1
5
S S S S
221