F50 - Gps Receiver Lla/Xyz Position - Symmetricom XLi User Manual

S S S S S S S S S
To set the frequency of one of the output ports (card #2 port #1 to 8 kPPS), enter:
F44 B2 1 8<CR>
XLi responds:
OK<CR><LF>
To set all four ports on a card with one serial string, enter:
F44 B1 1 1000 2 2000 3 2048 4 16<CR>
This sets the ports on card #1 as follows:
• Port #1 to 1000 kPPS
• Port #2 to 2000 kPPS,
• Port #3 to 2048 kPPS,
• Port #4 to 16 kPPS.
F50 – GPS Receiver LLA/XYZ Position
Use function F50 to display the current GPS position. Specifically, Use function F50 to:
• Display the option bay location of the GPS receiver(s). If multiple GPS receivers are available,
use the UP/DOWN ARROW keys to select a receiver.
• Select the positional coordinate system, Latitude Longitude Altitude (LLA) or XYZ (Earth-
Centered, Earth-Fixed XYZ coordinates).
• If LLA is selected, Altitude Mode shows the elevation in given meters.
Command Line
Use the following format to display the current settings display the current position for the GPS receiver
in LLA coordinates:
F50<S>B<N><SEP>LLA<CR>
XLi responds with the coordinate information in the following format:
F50<S>B<N><SIGN><S><DEG>d<MIN>'<SEC>"<S><SIGN><S><DEG>d<MIN>'<SEC>"<S><ALT><UNITS><CR
><LF>
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S S S S S S S S S S S S S S S S S S S
2
1
5
S S S S
75