Command Line Interface; Logging In; Operator Login; Guest Login - Symmetricom XLi User Manual

S S S S S S S
To enter numeric values in a function:
Press
1
ENTER
3
ENTER
ENTER
05152002
ENTER
ENTER
ENTER

Command Line Interface

To open a command line session, connect to the serial or network port using a terminal or a terminal
emulation program on a PC.
Consult "5: Function Reference" on page 45

Logging In

Two user names are available for logging in to the network port's command line interface: "operator" and
"guest". The serial port's command line interface does not require the user to log in.

Operator Login

The Operator has full privileges to change the settings in all the XLi's functions and to perform firmware
updates. As shipped, you can log in as Operator using:
User Name: operator
Password: janus
To maintain security, change the Operator password at installation. If you are logged in as "operator", the
only command line interface function you cannot perform is changing the Guest password.

Guest Login

Use the guest login to view function settings. As shipped, you can log in as guest using:
User Name: guest
Password: ttm
To maintain security, change the Guest password at installation. If you try to use a function that is not
accessible from the guest login, you will see a message such as "Access denied" or "Command
canceled".
38
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
Result
Displays the "FUNCTION" prompt
Enters "3" as the function number
Opens Function 3, displays the first screen, "TIME MODE – LOCAL"
Displays the second parameter, "DATE-TIME...<mm>/<dd>/<yyyy>"
Enters May 15, 2002 as today's date. (replace)
Displays "DATE-TIME"
XLi asks "SAVE CHANGES? YES"
Selects "YES", saves the changes, and displays the Status Display
S S S S S S S S S
for information on the function commands.
S S S S S S S S S
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S