F108 - Oscillator Configuration; F110 - J1 Input (Time Code, Tiet) - Symmetricom XLi User Manual

S S S S S S S S S
F108 – Oscillator Configuration
Use function F108 to display the type of oscillator being used:
• TCVCXO
• OCXO
• HIGH (High Stability OCXO)
• RUBIDIUM
For more descriptions of the oscillator types, see
Command Line
The oscillator type is defined by the hardware configuration of the clock, and is not configured through
the command line or keypad/display user interfaces. To request the oscillator configuration, enter:
F108<S><CR>
The XLi responds:
F108<S>OSCILLATOR<S>CONFIG<S><OSC><CR><LF>
where:
= ASCII character F
F
= Function number
108
= ASCII space character one or more
<S>
= Carriage Return, equivalent to pressing the Enter key on a keyboard
<CR>
<OSC> = Oscillator type: TCVCXO, OCXO, HIGH_STAB_OCXO), or RUBIDIUM
For example, enter the following string:
F108<CR>
The XLi responds (example):
F108 OSCILLATOR CONFIG HIGH_STAB_OCXO<CR><LF>
F110 – J1 Input (Time Code, TIET)
Note:
Time Interval - Event Time (TIET) is an optional feature. If purchased at the same time as the XLi,
it comes enabled on the system. To purchase this option after you have purchased the XLi, con-
tact Symmetricom Sales.
F110 can configure the J1 input port on the main CPU card as a time code reference source for the
system clock, or it can configure J1 as the input for TIET operation.
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
See "H: Sales and Customer Assistance" on page 295.
S S S S S S S S S
"P7: Oscillators" on page
S S S S S S S S S
2
223.
1
5
S S S S
137