Move The Configuration Files Back To The Xli - Symmetricom XLi User Manual

S S S S S S S S S
If using the pre configured FTP server (downloaded from http://www.ntp-systems.com/zip/warftpd1.zip),
the FTP places the configuration files in C:\TrueTime, the default or home directory of "anonymous".
Note:
Follow these guidelines when editing the configuration files:
• If the editor displays odd 'box' characters or the lines of text don't wrap properly, close the file
without saving changes and switch to a different text editor.
• Don't rename or save the configuration files as a new file type.
• Some text editors encode end-of-line carriage returns that cause errors when XLi refers to the
file. Notepad, WordPad, Microsoft Word, and Vim don't seem to have this problem.
• The configuration files are automatically transferred to/from the FTP server in binary format.
They retain the DOS or UNIX file conventions of the editor. XLi works with either format.

Move the Configuration Files Back to the XLi

Reboot Warning: The following steps cause the XLi to reboot.
Using the XLi's command line, enter one of the commands below, replacing
<IP Address> with the IP address of your workstation/FTP server.
To move the NTP config files, type:
>f100 config ntp set host:<IP Address> dir:<subdir>
To move the SNMP config file, type:
>f100 config snmp set host:<IP Address> dir:<subdir>
To move the NTP and SNMP config files, type:
>f100 config ntp snmp set host:<IP Address> dir:<subdir>
Here's an example of a successful SNMP and NTP config file transfer:
>>f100 config set ntp snmp host:192.168.0.1 dir:
Host config ip 192.168.0.1 already configured
Are you sure(y/N)?y
Source file snmp.conf bytes read: 1275
Dest file /config/snmp.conf bytes written: 1275
Source file ntp.conf bytes read: 1166
Dest file /etc/ntp.conf bytes written: 1166
Source file ntp.keys bytes read: 44
Dest file /etc/ntp.keys bytes written: 44
Configuration files transferred successfully!
Resetting...
If you get "Error: Can't open source file", verify that the FTP server's <<Local Server>> is
running.
After XLi receives the configuration files, it reboots, and goes through the normal startup process.
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S S S S S S S S S S S S S S S S S S S
2
1
5
S S S S
237