Status Display; Menu Display - Symmetricom XLi User Manual

S S S S S S S S S

Status Display

The Status Display comes up automatically when the XLi is rebooted. To manually switch from another
display to the Status Display, press STATUS button on the keypad. The display appears with the
following format:
<∗> <REF CLK>
<STATUS>
<TYPE> DDD:HH:MM:SS YYYY
For example:
∗ GPS PRI
LOCKED
UTC 200:21:24:09 2002
where:
LOCKED = The System Clock is Locked or Unlocked to the current reference source. See Clock
Status in
* = A reference source input has been configured, but is not available. (Note: When using
GPS, "*" may remain visible for up to 13 minutes) See
Configuration" on page 154
GPS PRI = Shows the reference source type (The function that controls each one is noted below):
Automatic switching between the reference sources listed above is controlled by
Clock Source Control" on page 107
UTC = Time display mode: GPS, UTC, Standard, or Local (
200:21:24:09 2002 = The time, in DDD:HH:MM:SS YYYY format (

Menu Display

To use the XLi functions that are available from the keypad, press the MENU button on the keypad.
"Function Summary" on page 45
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
"F73 – Alarm Control / Status" on page 94
• GPS PRI, GPS SEC (
• IRIG A, IRIG-B, NASA 36 (
page 137
)
• HQ/PPS PRI, HQ/PPS SEC ("
figuration" on page 161
"F113 – J3 Input (Aux Ref, Freq Meas)" on page 146
• AUX REF (
lists which functions are available from the Menu Display.
S S S S S S S S S
"F119 – GPS Receiver Configuration" on page 154
"F110 – J1 Input (Time Code, TIET)" on
"F123 – Have Quick Input/1 PPS Sync Con-
.
"F69 – Time Mode" on page 89
See "Time Display" on page 34.
S S S S S S S S S
2
1
"F119 – GPS Receiver
5
)
)
S S S S
)
"F74 –
)
35