F100 G - Gateway - Symmetricom XLi User Manual

S S S S S S S
where:
F
1
100
<S>
IP
<nnn.nnn.nnn.nnn> = dotted decimal address (0 to 255)
<CR>
For example, enter:
F100 SM 255.255.255.240<CR>
XLi responds:
OK<CR><LF>
RESETING THE UNIT<CR><LF>
PLEASE WAIT...<CR><LF>
To obtain the Subnet Mask of the unit Standard network port, enter:
F100 SM<CR>
The XLi responds:
F100 SM <nnn.nnn.nnn.nnn><CR><LF>
where "<nnn.nnn.nnn.nnn>" is the dotted decimal address notation.
An example of the response is:
F100 SM:255.255.255.125<CR><LF>
F100 G – Gateway
Note:
F100 G can be used concurrently with F100 IP and F100 SM. See the last example provided in
the F100 IP – IP Address
Use function F100 G to display or configure the Default Gateway. To set the Default Gateway and restart
the unit, enter:
F100<S>G<S><nnn.nnn.nnn.nnn><CR>
122
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
= ASCII character F
= unit function number
= space
= specify IP command
= input line terminator
section, which starts on
S S S S S S S S S
page 120.
S S S S S S S S S
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S