10: Xli-Generated Messages; Error Messages - Symmetricom XLi User Manual

S S S S S S S S S

10: XLi-Generated Messages

Error Messages

ERROR 01 VALUE OUT OF RANGE
You entered a command using the correct format that contained a value, probably numeric, that was
outside the range of acceptable values.
Recovery Action: Re-enter the command using an acceptable value.
ERROR 02 SYNTAX
You entered a valid command, but using the wrong format.
Recovery Action: Re-enter the command, using the correct format.
ERROR 03 BAD/MISSING FIELD
You entered a command that lacks a required field.
Recovery Action: Re-enter the command, using the required fields.
ERROR 04 - BAD DATA/TIMEOUT CONDITION
The XLi option card did not respond to the XLi soon enough.
Recovery Action: Re-enter the command, using the required fields.
ERROR: Invalid Command
You have entered an invalid command.
Recovery Action: Consult the manual for the correct command and re-enter.
ERROR: Can't create netdevice <NAME>
The XLi can not create the device needed to map the host to a drive.
Recovery Action: Restart the Unit. If this error message persists, contact Symmetricom Technical
Customer Service.
ERROR: Can't set host <NAME> ip <ADDRESS>
You have incorrectly entered a parameter, or there is no room currently in the Host table for another IP
Address.
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S S S S S S S S S S S S S S S S S S S
2
1
5
S S S S
231