Other Features - Symmetricom XLi User Manual

S S S S S S S
Figure 19:Setup, Measurement, and Comms
1

Other Features

Aside from logging TIET and Freq Meas data, the TimeMonitor XLi Measurement software can be used
as follows:
• To send pre-configured commands to the XLi: Select the Command radio button and select a
command from the pull down menu. The results of the command are displayed in the Response
field.
• To open a terminal session with the XLi and type commands to the XLi command line, select the
Terminal radio button, and enter commands directly in the Response field. Consult
Function Reference (page 45)
• To end a Command or Terminal session with the XLi, click the Disconnect radio button.
• To display the location of all CPU-aware option cards, click the Bays button, which sends the
F118 – Option Board Configuration
228
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
for the specific syntax of each command.
S S S S S S S S S
command to the XLi. Note the location of the GPS receiver.
S S S S S S S S S
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S
Chapter 5: