F118 - Option Board Configuration - Symmetricom XLi User Manual

S S S S S S S
F118 – Option Board Configuration
Use function F118 to query the XLi for the option bay location of CPU-aware cards. The following figure
1
shows the position of the option bays as seen when viewing the XLi from the rear.
Figure 8: Option Bay Positions
1 U Chassis:
Power Supply
2 U Chassis:
Opt. Power Supply
Power Supply
The cards recognized by F118 are as follows:
• N.1 Frequency Synthesizer (87-8022)
• GPS C/A Receiver (87-8028-2)
• Frequency and Time Deviation Monitor (87-8023)
• HaveQuick/1 PPS Time and Frequency Reference(87-8016-3)
• Have Quick Output with selectable TFOM (87-8016-6)
• PTTI BCD Output (87-8045)
• Parallel BCD mSec Output with Time Quality (87-8090)
• Parallel BCD uSec with Time Quality (87-8090-1)
• Parallel BCD mSec Output with Unlock Status (87-8090-2)
• GPS Receiver (86-8013)
The cards not recognized by F118 are as follows:
• N.8 Frequency Synthesizer (86-708-1)
• Multicode Output (87-6002-XL1)
• Low Phase Noise 5 MHz Output (87-8009-5)
• Low Phase Noise 10 MHz Output (87-8009-10)
• Enhanced Low Phase Noise Module (87-8040)
• 1, 5, 10 MHz Sine/MPPS Square Output (86-8008)
• T1 Telecom Interface Output (87-6000T1-8)
• E1 Telecom Interface Output (87-6000E1-6)
152
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
S S S S S S S S S
Bay 4
Bay 3
Bay 10
Bay 9
Bay 8
Bay 7
S S S S S S S S S
Bay 2
XLi CPU Module
Bay 1
Bay 6 Bay 2
Bay 5 Bay 1
Bay 4
XLi CPU Module
Bay 3
S S S S S S S S S
XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
S S S S S S