Cnfg - Configure Board Information Block - Motorola MVME2100 Installation And Use Manual

Modifying the Environment

CNFG - Configure Board Information Block

5
5-2
Use this command to display and configure the Board Information Block,
which is resident within the NVRAM. This data block contains various
elements detailing specific operational parameters of the MVME2100.
The structure for the board is shown in the following example:
Board (PWA) Serial Number
Board Identifier
Artwork (PWA) Identifier
MPU Clock Speed
Bus Clock Speed
Ethernet Address
Primary SCSI Identifier
System Serial Number
System Identifier
License Identifier
The parameters that are quoted are left-justified character (ASCII) strings
padded with space characters, and the quotes (") are displayed to indicate
the size of the string. Parameters that are not quoted are considered data
strings, and data strings are right-justified. The data strings are padded
with zeroes if the length is not met.
The Board Information Block is factory-configured before shipment.
There is no need to modify block parameters unless the NVRAM is
corrupted.
Refer to the PPCBug Firmware Package User's Manual for a description
of CNFG and examples.
= MOT00xxxxxxx
= MVME2100
= 01-W3403FxxC
= 250
= 083
= 0001AFA0A57
= 07
= nnnnnnn
= Motorola MVME2101
= nnnnnnnn
Computer Group Literature Center Web Site