Motorola MVME2100 Installation And Use Manual page 74

Modifying the Environment
5
5-4
The default value for this parameter is one.
Note:
The bug does not automatically acquire all of the memory it
is allowed. Rather, it accumulates memory as necessary in
one megabyte blocks.
Field Service Menu Enable [Y/N] = N?
Y
N
Remote Start Method Switch [G/M/B/N] = B?
The Remote Start Method Switch is used when the MVME2100 is
cross-loaded from another VME-based CPU in order to start execution
of the cross-loaded program.
G
M
B
N
Probe System for Supported I/O Controllers [Y/N] = Y?
Y
N
Display the field service menu.
Do not display the field service menu. (Default)
Use the Global Control and Status Register to pass
and start execution of the cross-loaded program.
Use the Multiprocessor Control Register (MPCR) in
shared RAM to pass and start execution of the cross-
loaded program.
Use both the GCSR and the MPCR methods to pass
and start execution of the cross-loaded program.
(Default)
Do not use any Remote Start Method.
Accesses will be made to the appropriate system
buses (e.g., VMEbus, local MPU bus) to determine
the presence of supported controllers. (Default)
Accesses will not be made to the VMEbus to
determine the presence of supported controllers.
Computer Group Literature Center Web Site