Diagnostic Tests - Motorola MVME2100 Installation And Use Manual

Diagnostic Tests

The PPCBug hardware diagnostics are intended for testing and
troubleshooting the MVME2100.
In order to use the diagnostics, you must switch to the diagnostic directory.
You may switch between directories by using the SD (Switch Directories)
command. You may view a list of the commands in the directory that you
are currently in by using the HE (Help) command.
If you are in the debugger directory, the debugger prompt
displayed, and all of the debugger commands are available. Diagnostics
commands cannot be entered at the
If you are in the diagnostic directory, the diagnostic prompt
displayed, and all of the debugger and diagnostic commands are available.
PPCBug's diagnostic test groups are listed in
tests are performed on the MVME2100. Using the HE command, you can
list the diagnostic routines available in each test group. Refer to the
PPCBug Diagnostics Manual listed in Appendix A,
Documentationfor complete descriptions of the diagnostic routines and
instructions on how to invoke them.
http://www.motorola.com/computer/literature
prompt.
PPC5-Bug>
Table 4-2. Note that not all
Related
Using PPCBug
is
PPC5-Bug>
is
PPC5-Diag>
4-11
4