Configuring Privacy Masks - Honeywell equIP Series User Manual

2MP/4MP Low Light WDR IP Camera User Guide
Snapshot Type
Set the Snapshot Type to General or Event.
General
Snapshots are taken according to a user-defined schedule.
Event Snapshots are taken whenever an alarm, motion detection, camera tampering,
or system event occurs.
Image Size
The image size is determined by the main stream resolution setting. It is not configurable.
(See Resolution
Quality
Set the Quality to a value between 1 (lowest) and 6 (highest).
Interval
Select a snapshot frequency between 1 snapshot per second (1s) and 7 snapshots per
second (7s), or click Customized to define a custom setting between 1 and 50,000 seconds.
Click Save to apply the settings.

Configuring Privacy Masks

You can configure privacy mask properties on the Setup  Compression Setup  Overlay 
Privacy Masking page.
To enable privacy masking, click Enable. Four privacy masks appear in the preview window.
20
on page 19).