Configuring Face Detection Events - Honeywell equIP Series User Manual

For the snapshot to be attached to the email notification, the
Note
Attachment check box must be selected in Setup  Network Setup
 SMTP (Email). See
Click Save to apply the settings.
13.

Configuring Face Detection Events

You can configure face detection event settings on the Setup  Onboard Video Analytics 
Face Detection page.
To enable face detection:
Select the Enable check box.
1.
Click Draw Target to set up the face detection area. You can move or resize the area using
2.
your mouse. To move the area, drag one of the sides. To resize the area, drag one of the
corner handles.
Next to Alarm Period, click Setup. The Alarm Period window opens.
3.
Set the days and times when you want the alarm function to be active, and then click Save.
4.
To enable face enhancement, select the Enable Face Enhancement check box.
5.
To start recording video when an event is detected, select the Record check box.
6.
In the Record Delay field, enter the number of seconds that the system will continue to
7.
record video after the event has ended. Enter a value between 10 and 300.
To generate an alarm output when an event is detected, select the Alarm Output check
8.
box and select the alarm output(s) to be activated.
In the Alarm Delay field, enter the number of seconds that the system will continue to
9.
generate an alarm output after the event has ended. Enter a value between 10 and 300.
Configuring Email Settings
Configuring Event Settings
on page 33.
51