Download Print this page

Configuring Privacy Masks - Honeywell H4L6GR2 User Manual

Ultra hd ip camera
Hide thumbs


Table of Contents
Ultra HD IP Camera User Guide
Image Size
The image size is determined by the main stream resolution setting. It is not configurable.
Set the Quality to a value between 1 (lowest) and 6 (highest).
Select a snapshot frequency between 1 snapshot per second (1s) and 7 snapshots per
second (7s), or click Customized to define a custom setting between 1 and 50,000 seconds.
Click Save to apply the settings.

Configuring Privacy Masks

You can configure privacy mask properties on the Setup > Compression Setup > Overlay >
Privacy Masking page.
To enable privacy masking, click Enable. Four privacy masks appear in the preview window.
Delete any masks that you don't need. To delete a mask, right-click it or select it and then
click Delete. To remove all the masks, click Remove All.
To move a mask, select it and drag the center of the mask.
Snapshots are taken whenever an alarm, motion detection, camera tampering, or
system event occurs.
on page 21).


Table of Contents

  Related Manuals for Honeywell H4L6GR2

This manual is also suitable for: