Honeywell equIP Series User Manual page 28

2MP/4MP Low Light WDR IP Camera User Guide
Click the – and + signs to make fine adjustments.
WDR Corrects the exposure of overexposed and underexposed areas of the scene.
Drag the slider to adjust the WDR level. Click the – and + signs to make fine
adjustments.
SAC Automatically decreases the brightness of bright areas and increases
the brightness of dark areas according to the environmental lighting.
Click Save to apply the settings.
White Balance
White balance compensates for the different color temperatures of different light sources,
ensuring consistent colors- in the image.
In the White Balance area, you can set the white balance mode to Auto, Natural, Street Lamp,
Outdoor, Manual or Customize Region.
Auto
Natural
Street Lamp
Outdoor
Manual
Customize Region White balance is applied to a user-defined area within the scene.
Click Save to apply the settings.
Day and Night
In the D&N Mode area, you can set the day and night mode,
sensitivity, and delay time.
By default, the camera automatically outputs color video or
black-and-white video depending on the amount of light in the
scene. To output only color video, set Mode to Color. To output
only black-and-white video, set Mode to Black & White.
Sensitivity controls the sensitivity to lighting changes that cause the camera to switch
between day (color) and night (black-and-white) mode. Select Low, Medium, or High.
Delay defines the delay time before switching between modes. Select a value between 2s and
10s.
Smart IR function is disabled by default. To enable it, click ON. Click Save to apply the
settings.
IR Light
In the IR Light area, you can set the infrared LED mode and other settings. Set Mode to
Manual, Zoom Priority, Smart IR, or OFF.
Manual
Zoom Priority IR settings are adjusted automatically based on the zoom setting.
SmartIR
16
White balance is adjusted automatically.
White balance is optimized for natural lighting.
White balance is optimized for yellow-tinted lighting.
White balance is optimized for outdoor environments.
Red gain and blue gain values are set by the user.
IR near and far distance brightness are set by the user.
IR settings are adjusted automatically to prevent overexposure or