Resetting The Camera - Honeywell equIP Series User Manual

To change the password, select the Modify Password check box, enter the Old
2.
Password and the New Password in the corresponding fields, and then re-enter the
new password in the Confirm Password field.
To change the group, select a group from the Group list.
3.
If you want, you can edit the description in the Remark field.
4.
From the Authority List, select or deselect specific permissions for the account (see
5.
8-1), or select All to select/deselect all of the available permissions.
Each user is assigned to a group. The individual user's permissions
cannot exceed those of the group to which the user belongs. To
Note
modify permissions at the group level, see
page 64..
Click Save to apply the settings.
6.
Deleting a User Account
You can delete any user account that you have created (you cannot delete the admin user).
To delete a user account:
On the User Name tab, select the user account that you want to delete (your selection
1.
will be highlighted yellow), and then click the Delete icon
A confirmation message appears. Click OK to continue. The user account is removed
2.
from the list.

Resetting the Camera

You can reset the camera to its factory default settings on the Setup  System Setup 
Default page.
Configuring System Settings
Modifying a Group on
.
Table
67