Honeywell equIP Series User Manual page 76

2MP/4MP Low Light WDR IP Camera User Guide
If you want, you can enter a brief description in the Remark field.
3.
From the Authority List, select permissions for the group.
4.
Table 9-1 Permissions
Name
Live
Playback
Record Control
Backup
User Management
Alarm
Log Search
Clear Log
Upgrade
Auto Maintain
General
Video/Audio
Schedule/Destination
Network
Event
Video Detection
Restore Defaults
Camera Properties
IVS
Click Save to apply the settings. The group is added to the list.
5.
Modifying a Group
You can modify the permissions of the administrator group, user group, and any custom
groups that you have created.
To modify a group:
On the Group tab, select the group that you want to modify (your selection will be
1.
64
Description
The user can view live video and access all of the controls in the
Live interface.
The user can play back recorded video and access all of the
controls in the Playback interface.
The user can access the settings in Setup  Storage Setup 
Record Control.
The user can save and export video clips in the Playback
interface.
The user can access the settings in Setup  System Setup 
Account.
The user can access the settings in Setup  Alarm Setup 
Alarm.
The user can search logs in Setup  Information  Log.
The user can clear logs in Setup  Information  Log.
The user can upgrade firmware in Setup  System Setup 
Upgrade.
The user can access the settings in Setup  System Setup 
Auto Maintain.
The user can access the settings in Setup  System Setup 
General.
The user can access the settings in Setup  Compression
Setup  Video and in Setup  Audio Setup.
The user can access the settings in Setup  Storage Setup >
Schedule and in Setup  Storage Setup  Destination.
The user can access the settings in Setup  Network Setup.
The user can access the settings in Setup  Alarm Setup >
Event.
The user can access the settings in Setup  Video Analytics 
Video Detect.
The user can access the settings in Setup  System Setup 
Default.
The user can access the settings in Setup  Camera Setup 
Properties.
The user can access the settings in Setup  Video Analytics.